Stopz Mold Resistant Waterproofer

Stopz® is a mold and mildew resistant* waterproofing paint designed to waterproof bare masonry and hold back 10 psi of hydrostatic pressure. This product will work either above or below grade. Stopz is an acrylic, fast drying formula that works by penetrating the concrete and expanding deeply into the pores of the masonry to waterproof and reduce radon emissions. Stopz is easily applied with a brush and/or roller.

Dry Fall Latex Flat

Ready to use acrylic latex flat paint formulated for airless spray applications on interior surfaces. It may be used on wood, gypsum board, plaster, concrete, masonry block and completely primed ferrous metal. This latex can be used as dry fall paint on ceilings 16 -20 feet or higher when the relative humidity is less than 70%.

Skid Grip Anti-Slip Coating

Skid Grip is an outstanding, 100% acrylic-textured coating for use over asphalt, concrete or other surfaces where an extremely durable, skid resistant finish is desired. Exceeds ADA standards for anti-slip surfaces.

Fix-Rite Interior/Exterior Latex Paint

Fix Rite Latex Semi Gloss is a multi-purpose latex enamel for use on wood, drywall, plaster, masonry and metal. It is designed for both interior and exterior applications. Its high hiding, fast drying properties make it a good selection for multi-unit new construction projects and apartment maintenance firms where a washable, dirt resistant finish is desired. It is ideal for any place where the durability of a semi-gloss enamel is needed.

Fix-Rite Interior/Exterior Latex Paint

Fix Rite Latex Flat is a multi-purpose, durable, flat coating for both interior and exterior use. FixALL Fix Rite Latex Flat may be used on wood, drywall, plaster, masonry, stucco and primed metal. It is high hiding, easy to apply, and cleans up after use with soap and water. FixALL Fix Rite Latex Flat dries in less than one hour to a non-yellowing, non-chalking and blister resistant finish.


This durable 100% acrylic, ceramic reinforced waterborne enamel provides a durable High Gloss  finish for many general maintenance requirements. It provides superior color retention and moisture resistance when used exterior and is rust inhibiting when applied in the proper system.

*Note F52104 Wrought Iron Black is available as a Low Luster only.

Everlife Waterborne Enamel

Everlife Waterborne Enamel Satin is especially designed for use on interior and exterior surfaces. This tough, durable latex film dries to a medium gloss finish and can be lightly walked upon in about 4 hours after painting. Its excellent adhesion, toughness and resistance to alkalinity makes this an ideal all purpose floor finish. Recommended for areas where safety (ignitable fumes) and rapid dry are major considerations, and for concrete floors where dusting is a problem. Permits installation of tile and other floor covering materials directly over it.

MasterWorks Program
Open the Door to a World of Opportunities with Exclusive MasterWorks Growth-Driving Programs